API Guide

9 root 20 0 0 0 0 S 6.1 0.0 5:22.41 rcuos/1
819 snmp 20 0 52736 6696 4132 S 6.1 0.2 2:44.18 snmpd
30452 admin 20 0 22076 2524 2100 R 6.1 0.1 0:00.02 top
1 root 20 0 112100 5840 3032 S 0.0 0.1 0:12.32 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:25.37 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:+
7 root 20 0 0 0 0 R 0.0 0.0 5:15.27 rcu_sched
8 root 20 0 0 0 0 S 0.0 0.0 2:43.64 rcuos/0
10 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/0
12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcuob/1
13 root rt 0 0 0 0 S 0.0 0.0 0:07.30 migration/0
14 root rt 0 0 0 0 S 0.0 0.0 0:02.18 watchdog/0
15 root rt 0 0 0 0 S 0.0 0.0 0:02.12 watchdog/1
16 root rt 0 0 0 0 S 0.0 0.0 0:04.98 migration/1
17 root 20 0 0 0 0 S 0.0 0.0 0:03.92 ksoftirqd/1
19 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/1:+
20 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
21 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
22 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
23 root 20 0 0 0 0 S 0.0 0.0 0:00.41 khungtaskd
24 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
25 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
--more--
OS10# show processes node-id 1 pid 1019
top - 09:21:58 up 5 days, 8 min, 2 users, load average: 0.18, 0.30, 0.31
Tasks: 1 total, 0 running, 1 sleeping, 0 stopped, 0 zombie
%Cpu(s): 9.7 us, 3.9 sy, 0.3 ni, 85.8 id, 0.0 wa, 0.0 hi, 0.3 si, 0.0 st
KiB Mem: 3998588 total, 2089040 used, 1909548 free, 143772 buffers
KiB Swap: 399856 total, 0 used, 399856 free. 483276 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1019 root 20 0 1829416 256080 73508 S 6.6 6.4 1212:36 base_nas
OS10#
Identifier
GUID-EA34ADB8-38A7-46D4-B3D6-F649D5EBA48B
Version 4
Status Translation approved
LED 设置
信标 LED 标识端口的位置和系统状态（闪烁或稳定的 LED）。
注: 此功能在 Z9332F-ON 平台上不受支持。
使用以下命令更改系统或接口的定位 LED 的当前状态：
location-led system {node-id | node-id/unit-id} {on | off}
location-led interface ethernet {chassis/slot/port[:subport]} {on | off}
更改系统定位 LED 的状态
OS10# location-led system 1 on
OS10# location-led system 1 off
更改接口定位 LED 的状态
OS10# location-led interface ethernet 1/1/1 on
OS10# location-led interface ethernet 1/1/1 off
OS10 故障处理 1329