Users Guide

Example
OS10# show qos interface ethernet 1/1/10
Ethernet 1/1/10
unknown-unicast-storm-control : 100 pps
multicast-storm-control : 200 pps
broadcast-storm-control : Disabled
flow-control-rx: Enabled
flow-control-tx: Disabled
Service-policy (Input)(qos): p1
Supported
Releases
10.2.0E or later
show policy-map
Displays information on all existing policy-maps.
Syntax
show policy-map type {control-plane | qos | queuing | network-qos}]
[policy-map-name]
Parameters
● type — Enter the policy-map type — qos, queuing, or control-plane.
● qos — Displays all policy-maps of qos type.
● queuing — Displays all policy-maps configured of queuing type.
● network-qos — Displays all policy-maps configured of network-qos type.
● control-plane — Displays all policy-maps of control-plane type.
● policy-map-name — Displays the QoS policy-map name details.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show policy-map
Service-policy(qos) input: p1
Class-map (qos): c1
set qos-group 1
Service-policy(qos) input: p2
Class-map (qos): c2
set qos-group 2
Supported
Releases
10.2.0E or later
show qos control-plane
Displays the QoS configuration applied to the control-plane.
Syntax
show qos control-plane
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Monitors statistics for the control-plane and troubleshoots CoPP.
Example
OS10# show qos control-plane
Service-policy (Input): p1
1376 Quality of service