Concept Guide
Figure 102. Port Monitoring Example
Conguring Monitor Multicast Queue
To congure monitor QoS multicast queue ID, use the following commands.
1 Congure monitor QoS multicast queue ID.
CONFIGURATION mode
monitor multicast-queue queue-id
DellEMC(conf)#monitor multicast-queue 7
2 Verify information about monitor congurations.
EXEC mode
EXEC Privilege mode
show run monitor session
DellEMC#show run monitor session
!
monitor multicast-queue 7
DellEMC#
Flow-Based Monitoring
Flow-based monitoring conserves bandwidth by monitoring only the specied trac instead of all trac on the interface. It is available for
Layer 3 ingress trac. You can specify the trac that needs to be monitored using standard or extended access-lists. The ow-based
monitoring mechanism copies packets that matches the ACL rules applied on the port and forwards (mirrors) them to another port. The
source port is the monitored port (MD) and the destination port is the monitoring port (MG).
702
Port Monitoring