Service Manual

server is being applied
00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE
sent on Fo 0/56.
00:03:27: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
c If the configuration file is downloaded from the server, any saved startup-configuration on the flash
is ignored. If no configuration file is downloaded from the server or if you disabled the config-
download parameter, the startup-configuration file on the flash is loaded as in normal reload.
6 When the Dell Networking OS image and the configuration file have been downloaded, the IP address is
released.
00:04:06: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on
Fo 0/56.
00:04:06: %STKUNIT0-M:CP %IFMGR-5-ASTATE_DN: Changed interface Admin state to
down: Fo 0/56
7 The switch applies the configuration. The switch is now up and running and can be managed as usual.
Bare Metal Provisioning (BMP) 286