Users Guide

Parameters
c Enter a delineator character to specify the limits of the text banner. The delineator
is a percent character (%).
line Enter a text string for your MOTD banner the message with your delineator. The
delineator is a percent character (%).
Defaults No banner is configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage
Information
After entering the banner login command, type one or more spaces and a delineator character. Enter the
banner text then the second delineator character. When the user is connected to the router, if a message
of the day banner is configured, it displays first. If no message of the day banner is configured, the login
banner and prompt appear. After the user has logged in, the banner EXEC (if configured) displays.
Related
Commands
● banner exec — enables the display of a text string when you enter EXEC mode.
● banner login — sets a banner to display after successful login to the system.
cam-acl
Allocate content addressable memory (CAM) for IPv4 and IPv6 ACLs.
Syntax
Parameters
default Use the default CAM profile settings and set the CAM as follows:
● L2Acl : 2
● Ipv4Acl : 2
● Ipv6Acl : 0
● Ipv4Qos : 2
● L2Qos : 2
● L2PT : 0
● IpMacAcl : 1
● VmanQos : 0
● EtsAcl : 0
● FcoeAcl : 0
Control and Monitoring 91