Users Guide
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/5.
00:01:31: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/6.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/8.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Te 0/35.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Fo 0/56.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Fo 0/60.
00:01:47: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DISCOVER: DHCP DISCOVER sent on Ma 0/0.
3. The IP address, boot image lename, and conguration lename are reserved for the switch and provided in the DHCP reply
(one-le read method). The switch receives its IP address, subnet mask, DHCP server IP, TFTP server address, DNS server IP,
bootle name, and conguration lename from the DHCP server.
If a DHCP oer has no image path or conguration le path, it is considered to be an invalid BMP DHCP oer and the oer is
ignored. The rst DHCP oer with the IP address, Dell Networking OS image, and conguration le, or the IP address and Dell
Networking OS image, or the IP address and conguration le is chosen.
4. The DHCP OFFER is selected.
a. All other ports are set to shutdown mode.
00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP acquired IP 30.0.0.20 mask
255.255.0.0 server IP 30.1.1.1.
00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP tftp IP 30.0.0.1 dns IP 30.0.0.1
router IP 30.0.0.14.
00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP image file FTOS-SE-8.3.10.1.bin.
00:01:33: %STKUNIT0-M:CP %JUMPSTART-5-DHCP_OFFER: DHCP config file pt-s4810-12.
5. The switch sends a unicast message to the le server to retrieve the named Dell Networking OS le and/or the conguration
le from the base directory of the server.
a. If you use the bootfile-name option, the le name can be 256 bytes. If a lename eld is specied in the DHCP Oer,
the lename can be 128 bytes. The name can be a fully qualied URL or it can be a le name only.
b. When an Dell Networking OS image is found, the switch compares that image to the version the chassis currently has
loaded.
1. If there is a mismatch, the switch applies the downloaded version and reloads.
*********VALID IMAGE***********
DOWNLOADED RELEASE HEADER :
Release Image Major Version : 8
Release Image Minor Version : 3
Release Image Main Version : 8
Release Image Patch Version : 33
FLASH RELEASE HEADER B :
Release Image Major Version : 8
Release Image Minor Version : 3
Release Image Main Version : 10
Release Image Patch Version : 1
00:04:05: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_DOWNLOAD: The Dell Networking OS
image download is
successful.
Erasing Sseries Primary Image, please wait
.........................................................
.........................................................
.........................................................
.........................................................
.........................................................
..........00:09:50: %STKUNsyncing disks... IT0-M:CP %CHMGR-1
5-RELOAD: User done
request to reload the chassis
rebooting
2. If there is no version mismatch the switch downloads the conguration le.
00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-CFG_APPLY: The downloaded config from dhcp
server is being applied
00:03:27: %STKUNIT0-M:CP %JUMPSTART-5-JUMPSTART_RELEASE: DHCP RELEASE sent on Fo
0/56.
00:03:27: %STKUNIT0-M:CP %SYS-5-CONFIG_LOAD: Loading configuration file
230
Bare Metal Provisioning (BMP)