Reference Guide

438 | Interfaces
www.dell.com | support.dell.com
Figure 21-26. show interfaces dampening
View a dampening summary for the entire system using the command show interfaces dampening
summary from EXEC Privilege mode, as shown in the example below.
Figure 21-27. show interfaces dampening summary
Clearing Dampening Counters
Clear dampening counters and accumulated penalties using the command clear dampening, as shown in the
following example.
Figure 21-28. show interfaces dampening summary
Linking Dampening Support for XML
View the output of the following show commands in XML by adding | display xml to the end of the
command:
• show interfaces dampening
• show interfaces dampening summary
• show interfaces interface x/y
FTOS# show interfaces dampening
Interface State Flaps Penalty Half-Life Reuse Suppress Max-Sup
Te 0/0 Up 0 0 5 750 2500 20
Te 0/1 Up 2 1200 20 500 1500 300
Te 0/2 Down 4 850 30 600 2000 120
FTOS# show interfaces dampening summary
20 interfaces are configured with dampening. 3 interfaces are currently suppressed.
Following interfaces are currently suppressed:
Te 0/2
Te 3/1
Te 4/2
FTOS#
FTOS# clear dampening interface Te 0/1
FTOS# show interfaces dampening GigabitEthernet0/0
InterfaceStateFlapsPenaltyHalf-LifeReuseSuppressMax-Sup
Te 0/1Up00205001500300