Users Guide

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the Z9500 and S6000-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum number of

FIP snooping sessions supported per ENode server is 16.

p-snooping fc-map

Congure the FC-MAP value FIP snooping uses on all VLANs.

Syntax

fip-snooping fc-map fc-map-value

To return the congured FM-MAP value to the default value, use the no fip-snooping fc-map

command.

Parameters

fc-map-value Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.

Defaults 0x0EFC00

Command Modes

• CONFIGURATION

• VLAN INTERFACE