Reference Guide

show ip protocols
View information on all routing protocols enabled and active on the switch.
S5000
Syntax
show ip protocols
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show ip protocols
Routing Protocol is "bgp 1"
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-failover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
FTOS#
show ip route
View information, including how they were learned, about the IP routes on the switch.
S5000
Syntax
show ip route [ip-address] | [mask] | [longer-prefixes] | list
prefix-list | { protocol [process-id | routing-tag]}
{[ connected | all | static | summary]}
Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of the
device to view more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all
routes with a common prefix.
594