Reference Guide

You can also use the show bootvar command to display the current Reload mode for BMP
2.0 with the path of the FTOS image file retrieved from a DHCP server.
Example
FTOS#show reload-type
Reload-Type : normal-reload [Next boot : normal-reload]
Related
Commands
reload type – configures Reload mode as normal or Jumpstart.
stop jump-start
Stop the switch from reloading in Jumpstart mode to prevent an infinite loop.
S5000
Syntax
stop jump-start
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced for the S5000.
Usage
Information
Use the stop jump-start command on a switch running BMP 2.0 if the switch enters a
loop while reloading in Jumpstart mode; loop occurs when the switch is continuously trying to
contact a DHCP server and a DHCP server is not found. The
stop jump-start command
stops the switch from connecting to the DHCP server. After you use the stop jump-start
command, the next default reload type is a normal reload. This is indicated in the show
reload-type
command.
Related
Commands
reload type – configures Rload mode as normal or Jumpstart.
375