Users Guide

Location Description
• no shutdown
2/11
• Interface TenGigabitEthernet 2/11
• ip pim sparse-mode
• ip address 10.11.12.2/24
• no shutdown
2/31
• Interface TenGigabitEthernet 2/31
• ip pim sparse-mode
• ip address 10.11.23.1/24
• no shutdown
3/1
• Interface TenGigabitEthernet 3/1
• ip pim sparse-mode
• ip address 10.11.5.1/24
• no shutdown
3/11
• Interface TenGigabitEthernet 3/11
• ip pim sparse-mode
• ip address 10.11.13.2/24
• no shutdown
3/21
• Interface TenGigabitEthernet 3/21
• ip pim sparse-mode
• ip address 10.11.23.2/24
• no shutdown
Receiver 1
• Interface VLAN 300
• ip pim sparse-mode
• ip address 10.11.3.1/24
• untagged TenGigabitEthernet 1/1
• no shutdown
Receiver 2
• Interface VLAN 400
• ip pim sparse-mode
• ip address 10.11.4.1/24
• untagged TenGigabitEthernet 1/2
• ip igmp access-group igmpjoinlR2G2
• no shutdown
Preventing a PIM Router from Forming an Adjacency
To prevent a router from participating in PIM (for example, to congure stub multicast routing), use the following command.
• Prevent a router from participating in protocol independent multicast (PIM).
INTERFACE mode
ip pim neighbor-filter
564
Multicast Features