Users Guide
Conguring the Enable Password Command
To congure Dell Networking OS, use the enable command to enter EXEC Privilege level 15. After entering the command, Dell
Networking OS requests that you enter a password.
Privilege levels are not assigned to passwords, rather passwords are assigned to a privilege level. You can always change a password for any
privilege level. To change to a dierent privilege level, enter the
enable command, then the privilege level. If you do not enter a privilege
level, the default level 15 is assumed.
To congure a password for a specic privilege level, use the following command.
• Congure a password for a privilege level.
CONFIGURATION mode
enable password [level level] [encryption-mode] password
Congure the optional and required parameters:
• level level: Specify a level from 0 to 15. Level 15 includes all levels.
• encryption-type: Enter 0 for clear text, 7 for DES-encrypted text, or 8 for sha256-based encrypted text.
• password: Enter a string.
To change only the password for the enable command, congure only the password parameter.
To view the conguration for the enable secret command, use the show running-config command in EXEC Privilege mode.
In custom-congured privilege levels, the enable command is always available. No matter what privilege level you entered Dell Networking
OS, you can enter the enable 15 command to access and congure all CLIs.
Conguring Custom Privilege Levels
In addition to assigning privilege levels to the user, you can congure the privilege levels of commands so that they are visible in dierent
privilege levels.
Within Dell Networking OS, commands have certain privilege levels. With the privilege command, you can change the default level or
you can reset their privilege level back to the default.
• Assign the launch keyword (for example, configure) for the keyword’s command mode.
• If you assign only the rst keyword to the privilege level, all commands beginning with that keyword are also assigned to the privilege
level. If you enter the entire command, the software assigns the privilege level to that command only.
To assign commands and passwords to a custom privilege level, use the following commands. You must be in privilege level 15.
1 Assign a user name and password.
CONFIGURATION mode
username name [access-class access-list-name] [privilege level] [nopassword | password
[encryption-type] password Secret]
Congure the optional and required parameters:
• name: Enter a text string up to 63 characters(maximum) long.
• access-class access-list-name: Restrict access by access-class..
• privilege level: The range is from 0 to 15.
• nopassword: No password is required for the user to log in.
• encryption-type: Enter 0 for plain text or 7 for encrypted text.
• password: Enter a string. Specify the password for the user.
772
Security