Reference Guide

Commands

show patch — displays the system patches loaded with the in-service modular hot

fix command.

process restartable

Enable a process to be restarted. Restartability is subject to a maximum restart limit. This limit is defined as a configured

number of restarts within a configured amount of time. On the software exception that exceeds the limit, the system

reloads (for systems with a single RPM) or fails over (for systems with dual RPMs).

S4820T

Syntax

process restartable [process] [count number] [period minutes]

Parameters

process

Configure a process to be restartable.

count

number

Enter the number of times a process can restart within the configured

period. The range is from 1 to 3. The default is 3.

period

minutes

Enter the amount of time within which the process can restart count

times. The range is from 1 to 60 minutes. The default is 60 minutes.

Default By default, a process can be restarted a maximum of three times within one hour. On the

exception that exceeds this limit, the system reloads or fails over.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the

relevant

FTOS Command Line Reference Guide

The following is a list of the FTOS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.12.0 Introduced on the S4810.

Version 8.4.1.0 Introduced on the E-Series.

Commands

show processes restartable

530