Reference Guide

Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format
(A.B.C.D).
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.10.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added support for VLAN and port-channel interfaces on the E-Series.
Version 7.4.1.0 Introduced on the E-Series.
Related
Commands
show bfd neighbors — displays the BFD neighbor information on all interfaces or a specified
interface.
bfd protocol-liveness
Enable the BFD protocol liveness feature.
S4820T
Syntax
bfd protocol-liveness
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.10.0 Introduced on the S4810.
Version 7.4.1.0 Introduced on the E-Series.
270