Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4148U-ON
31323334353637383940
Table Of Contents
Log in
Connect a terminal emulator to the console serial port on the switch using a serial cable. Serial port settings are 115200 baud
rate, 8 data bits, and no parity.
To log in to an OS10 switch, power up and wait for the system to perform a power-on self-test (POST). Enter admin for both
the default user name and user password.
Change the default admin password after the first OS10 login. The system saves the new password for future logins. After you
change the password through the CLI, use the write memory command to save the configuration. For example:
OS10 login: admin
Password: admin
Last login: Sat Oct 6 00:25:33 UTC 2018 on ttyS0
Linux OS10 4.9.110 #1 SMP Debian 4.9.110-3+deb9u4 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-* Dell EMC Network Operating System (OS10) *-
-* *-
-* Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved. *-
-* *-
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
This product is protected by U.S. and international copyright and
intellectual property laws. Dell EMC and the Dell EMC logo are
trademarks of Dell Inc. in the United States and/or other
jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.
OS10# configure terminal
OS10# configure terminal
OS10(config)# username admin password alpha404! role sysadmin
OS10(config)# exit
OS10# write memory
Change the linuxadmin user password from the OS10 CLI after the first OS10 login. See User management section for more
information.
Configuration notes
All Dell EMC PowerSwitches:
When logging into a switch, it may take 6 to 10 seconds for the CLI prompt to display.
Check OS10 version
Dell EMC recommends that you upgrade a factory-loaded OS10 to the latest OS10 version.
● To check the current version of the OS10 image, use the show version command.
● To check the OS10 versions available for download, follow the procedure in OS10 upgrade->Download OS10 for upgrade.
Check OS10 version
OS10# show version
Dell EMC Networking OS10 Enterprise
Copyright (c) 1999-2021 by Dell Inc. All Rights Reserved.
OS Version: 10.5.2.4
Build Version: 10.5.2.4.215
Build Time: 2021-04-11T21:35:41+0000
System Type: S5248F-ON
Getting Started with Dell EMC SmartFabric OS10
39