Connectivity Guide

Parameters None
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command disables the SNMP agent from receiving the SNMP traps.
Example
OS10(config)# snmp-server vrf management
Supported Releases 10.4.1.0 or later
OS10 image upgrade
The image download command simply downloads the software image — it does not install the software on your device. The image
install command installs the downloaded image to the standby partition.
NOTE: If the active partition contains any modied text les or custom packages installed, they would not be available in the
standby partition. Backup the modied les and re-install the packages after downloading the image.
1 (Optional) Backup the current running conguration to the startup conguration in EXEC mode.
copy running-configuration startup-configuration
2 Backup the startup conguration in EXEC mode.
copy config://startup.xml config://<backup file name>
3 Download the new software image from dell.com/support, extract the bin les from the tar le, and save the le in EXEC mode.
image download file-url
4 (Optional) View the current software download status in EXEC mode.
show image status
5 Install the software image in EXEC mode.
image install image-url
6 (Optional) View the status of the current software install in EXEC mode. For the S5148F-ON platform, open a new SSH or Telnet
session to check the status of the current software.
show image status
7 Change the next boot partition to the standby partition in EXEC mode. Use the active parameter to set the next boot partition
from standby to active.
boot system standby
8 (Optional) Check whether the next boot partition has changed to standby in EXEC mode.
show boot detail
9 Reload the new software image in EXEC mode.
reload
Image download
OS10# image download ftp://userid:passwd@hostip:/filepath
Image install
OS10# image install image://filename.bin
Show version
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.2.0
Build Version: 10.4.2.0.226
Build Time: 2018-11-08T21:43:05-0800
System Type: S6010-ON
System management
653