Reference Guide

ip ssh server pubkey-authentication
Enable public key authentication in an SSH server.
Syntax
ip ssh server pubkey-authentication
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables the public key authentication.
Example
OS10(config)# ip ssh server pubkey-authentication
Supported Releases 10.3.0E or later
ip ssh server vrf
Congures the SSH server for the management VRF instance.
Syntax
ip ssh server vrf management
Parameters
• management — Congures the management VRF instance to be used to reach the SSH server.
Default Not congured
Command Mode CONFIGURATION
Usage Information By default, the SSH server is enabled. To congure the SSH server to be reachable on the management VRF
instance, use the ip ssh server vrf command.
Example
OS10(config)# ip ssh server vrf management
Supported Releases 10.4.0E(R1) or later
line vty
Enters the virtual terminal line mode to access the virtual terminal (VTY).
Syntax
line vty
Parameters None
Default Not congured
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# line vty
OS10(config-line-vty)#
Supported Releases 10.4.0E(R1) or later
468 System management