Connectivity Guide

• Enter the minimum severity level for logging to terminal lines in CONFIGURATION mode.
logging monitor severity
• Enter which server to use for syslog messages with the hostname or IP address in CONFIGURATION mode.
logging server {hostname/ip-address severity}
Disable system logging
You can use the no version of any logging command to disable system logging.
• Disable console logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging console severity
• Disable log-le logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging log-file severity
• Disable monitor logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging monitor severity
• Disable server logging and reset the minimum logging severity to the default in CONFIGURATION mode.
no logging server severity
• Re-enable any logging command in CONFIGURATION mode.
no logging enable
Enable server logging for log notice
OS10(config)# logging server dell.com severity log-notice
View system logs
The system log-le contains system event and alarm logs.
Use the show trace command to view the current syslog le. All event and alarm information is sent to the syslog server, if one is
congured.
The show logging command accepts the following parameters:
• log-file — Provides a detailed log including both software and hardware saved to a le.
• process-names — Provides a list of all processes currently running which can be ltered based on the process-name.
View logging log-le
OS10# show logging log-file
Jun 1 05:01:46 %Node.1-Unit.1:PRI:OS10 %log-notice:ETL_SERVICE_UP: ETL service
is up
Jun 1 05:02:06 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_UNIT_DETECTED: Unit pres
ent:Unit 1#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_PSU_DETECTED: Power Supp
ly Unit present:PSU 1#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_PSU_DETECTED: Power Supp
ly Unit present:PSU 2#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_FAN_TRAY_DETECTED: Fan t
ray present:Fan tray 1#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_FAN_TRAY_DETECTED: Fan t
ray present:Fan tray 2#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-notice:EQM_FAN_TRAY_DETECTED: Fan t
ray present:Fan tray 3#003
Jun 1 05:02:09 %Node.1-Unit.1:PRI:OS10 %log-crit:EQM_FAN_AIRFLOW_MISMATCH: MAJO
R ALARM: FAN AIRFLOW MISMATCH: SET: One or more fans have mismatching or unknown
airflow directions#003
Jun 1 05:02:10 %Node.1-Unit.1:PRI:OS10 %log-notice:NDM_SERVICE_UP: NDM Service
Ready!
Troubleshoot OS10
967