Connectivity Guide

event-notification success Sep 12,2016 20:51:51 Sep 12,2016 20:51:51
full-transfer success Sep 12,2016 20:30:28 Sep 12,2016 20:30:52
Supported Releases 10.2.0E or later
source-interface
Congures the interface used to connect to the SupportAssist server.
Syntax
source-interface interface
Parameters interface:
• ethernet node/slot/port[:subport] — Enter a physical Ethernet interface.
• loopback number — Enter a Loopback interface, from 0 to 16383.
• management 1/1/1 — Enter the management interface.
• port-channel channel-id — Enter a port-channel ID, from 1 to 28.
• vlan vlan-id — Enter a VLAN ID, from 1 to 4093.
Default A source interface is not congured.
Command Mode SUPPORT-ASSIST
Usage Information The no version of this command removes the congured source interface.
Example
OS10(conf-support-assist)# source-interface ethernet 1/1/4
Supported Releases 10.4.0E(R1) or later
street-address
Congures the street address information for the company.
Syntax
street-address {address}
Parameters address — Enter one or more addresses in double quotes. A maximum of 140 characters.
Default Not congured
Command Mode SUPPORT-ASSIST
Usage Information Add spaces to the company street address by enclosing the address in quotes. Separate each address with a space
to place on a new line. The no version of this command removes the company address conguration.
Example
OS10(conf-support-assist-Eureka)# street-address "One Dell Way" "Suite 100"
Supported Releases 10.2.0E or later
support-assist-activity
Schedules a time to transfer the activity log.
Syntax
support-assist-activity full-transfer [start-now] [schedule {hourly minute |
daily hour number min number | weekly day-of-week number hour number | monthly
day number hour number min number | yearly month number day number}]
Troubleshoot OS10 963