Connectivity Guide

match ipv6 next-hop
Congures a lter to match based on the next-hop IPv6 addresses specied in IP prex lists.
Syntax
match ipv6 next-hop prefix-list prefix-list
Parameters prefix-list — Enter the name of the congured prex list. A maximum of 140 characters.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the match.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# match ipv6 next-hop prefix-list test100
Supported Releases 10.3.0E or later
match metric
Congures a lter to match on a specic value.
Syntax
match metric metric-value
Parameters metric-value — Enter a value to match the route metric against, from 0 to 4294967295.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the match.
Example
OS10(conf-route-map)# match metric 429132
Supported Releases 10.2.0E or later
match origin
Congures a lter to match routes based on the origin attribute of BGP.
Syntax
match origin {egp | igp | incomplete}
Parameters
• egp — Match only remote EGP routes.
• igp — Match only on local IGP routes.
• incomplete — Match on unknown routes that are learned through some other means.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes the match.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# match origin egp
Access Control Lists 765