Connectivity Guide

Usage Information The no version of this command resets the value to the default.
Example
OS10(config)# router ospfv3
OS10(config-router-ospfv3-100)# maximum-paths 1
Supported Releases 10.3.0E or later
redistribute
Redistributes information from another routing protocol or routing instance to the OSPFv3 process.
Syntax
redistribute {bgp as-number | connected | static} [route-map route-map name]
Parameters
• as-number — Enter an autonomous number to redistribute BGP routing information throughout the OSPFv3
instance, from 1 to 4294967295.
• route-map name — Enter the name of a congured route-map.
• connected — Enter the information from the connected active routes on interfaces to redistribute.
• static — Enter the information from static routes on interfaces redistribute.
Defaults Not congured
Command Mode ROUTER-OSPFv3
Usage Information When an OSPFv3 redistributes, the process is not completely removed from the BGP conguration. The no
version of this command disables the redistribute conguration.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1
Example
(Connected)
OS10((config-router-ospfv3-100)# redistribute connected route-map dell2
Supported Releases 10.3.0E or later
router-id
Congures a xed router ID for the OSPFv3 process.
Syntax
router-id ip-address
Parameters ip-address — Enter the IP address of the router as the router ID.
Default Not congured
Command Mode ROUTER-OSPFv3
Usage Information Congure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use the xed
router ID for the active OSPFv3 router process. Changing the router ID brings down the existing OSPFv3
adjacency. The new router ID becomes eective immediatley. The no version of this command disables the router
ID conguration.
Example
OS10(config)# router ospfv3 10
OS10(config-router-ospfv3-100)# router-id 10.10.1.5
Supported Releases 10.3.0E or later
Layer 3 483