Connectivity Guide

Supported Releases 10.4.0E(R1) or later
ip igmp snooping query-interval
Congures time interval for sending IGMP general queries.
Syntax
ip igmp snooping query-interval query-interval-time
Parameters query-interval-time—Enter the interval time in seconds, ranging from 2 to 18000.
Default 60 seconds
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the query interval to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-interval 120
Supported Releases 10.4.1.0 or later
ip igmp query-max-resp-time
Congures the maximum time for responding to a query advertised in IGMP queries.
Syntax
ip igmp snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-max-resp-time 15
Supported Releases 10.4.1.0 or later
ip igmp version
Congures IGMP version.
Syntax
ip igmp version version-number
Parameters version-number—Enter the version number as 2 or 3.
Default 3
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the version number to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp version 2
Supported Releases 10.4.1.0 or later
Layer 3 417