Connectivity Guide

View conguration
Name server entries:
OS10# show fc ns switch brief
Total number of devices = 2
Intf# Domain FC-ID Enode-WWPN Enode-WWNN
port-channel10(Eth 1/1/9) 1 01:00:00 20:01:f4:e9:d4:a4:7d:c3
20:00:f4:e9:d4:a4:7d:c3
fibrechannel1/1/26 1 01:68:00 21:00:00:24:ff:7c:ae:0e 21:00:00:24:ff:7c:ae:
0e
Zoneset details:
vFabric id: 1
Active Zoneset: zonesetA
ZoneName ZoneMember
===========================================================
zoneA *20:01:f4:e9:d4:a4:7d:c3
*21:00:00:24:ff:7c:ae:0e
Pinned port status:
OS10# show fcoe pinned-port
Interface pinned-port FCoE Status
----------------- ---------------- -----------------
Po 10 Eth 1/1/9 Up
Conguration guidelines
When you are conguring dierent modes like F_Port, NPG, or FSB, consider the following:
• The F_Port, NPG, and FSB modes are mutually exclusive. You can enable only one at a time.
• You can enable the mode-specic commands only after enabling the specic feature.
• Before you disable F_Port and NPG features, delete the mode-specic congurations. When you disable FSB, the system automatically
removes the congurations.
F_Port commands
The following commands are supported on F_Port mode:
fc alias
Creates an FC alias. After creating the alias, add members to the FC alias. An FC alias can have a maximum of 255 unique members.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC alias. To delete an FC alias, rst remove it from the FC zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
Fibre Channel 141