Connectivity Guide

clear counters interface eee
Clears all EEE counters.
Syntax
clear counters interface eee
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear counters interface eee
Clear all eee counters [confirm yes/no]:yes
Supported Releases 10.3.0E or later
clear counters interface ethernet eee
Clears EEE counters on a specied Ethernet interface.
Syntax
clear counters interface ethernet node/slot/port[:subport] eee
Parameters node/slot/port[:subport]—Enter the interface information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear counters interface 1/1/48 eee
Clear eee counters on ethernet1/1/48 [confirm yes/no]:yes
Supported Releases 10.3.0E or later
eee
Enables or disables energy-ecient Ethernet (EEE) on physical ports.
Syntax
eee
Parameters None
Default Enabled on Base-T devices and disabled on S3048-ON and S4048T-ON switches.
Command Mode Interface
Usage Information To disable EEE, use the no version of this command.
Example (Enable
EEE)
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# eee
Example (Disable
EEE)
OS10(config)# interface ethernet 1/1/2
OS10(conf-if-eth1/1/2)# no eee
Supported Releases 10.3.0E or later
102 Interfaces