Users Guide

1/1/19(P)
23 port-channel23 (D) Eth STATIC
Supported
Releases
10.2.0E or later
show port-group
Displays the current port-group configuration on a switch.
Syntax
show port-group
Parameters None
Default None
Command Mode EXEC
Usage
Information
To view the ports that belong to each port-group, use the show port-group command. To configure a
port-group, use the port-group command.
Example:
S4148U-ON
OS10(config)# show port-group
port-group mode ports
1/1/1 Eth 10g-4x 1 2 3 4
1/1/2 FC 16g-2x 5 6 7 8
1/1/3 FC 16g-2x 9 10 11 12
1/1/4 FC 16g-2x 13 14 15 16
1/1/5 FC 16g-2x 17 18 19 20
1/1/6 FC 16g-2x 21 22 23 24
1/1/7 Eth 100g-1x 25
1/1/8 Eth 40g-1x 26
1/1/9 Eth 100g-1x 29
1/1/10 Eth 40g-1x 30
Example:
Z9264F-ON
OS10(config)# show port-group
hybrid-group profile Ports Mode
port-group1/1/1 restricted 1/1/1 Eth 10g-4x
1/1/2 Eth Disabled
port-group1/1/2 restricted 1/1/3 Eth 10g-4x
1/1/4 Eth Disabled
port-group1/1/3 restricted 1/1/5 Eth 10g-4x
1/1/6 Eth Disabled
port-group1/1/4 restricted 1/1/7 Eth 10g-4x
1/1/8 Eth Disabled
port-group1/1/5 restricted 1/1/9 Eth 10g-4x
1/1/10 Eth Disabled
port-group1/1/6 restricted 1/1/11 Eth 10g-4x
1/1/12 Eth Disabled
port-group1/1/7 restricted 1/1/13 Eth 10g-4x
1/1/14 Eth Disabled
port-group1/1/8 restricted 1/1/15 Eth 10g-4x
Supported
Releases
● 10.3.1E or later
● 10.4.3.0 or later—Z9264F-ON platform support added
show switch-port-profile
Displays the current and default port profile on a switch.
Syntax
show switch-port-profile node/slot
Parameters
● node/slot — Enter the switch information. For a standalone switch, enter 1/1.
Default
profile-1
412 Interfaces