Users Guide

show interface phy-eth
Displays the optical details for an interface.
Syntax
show interface phy-eth [interface] [transceiver]
Parameters
● interface—(Optional) Specify the interface corresponding to which you want to view the optical
details.
● transceiver—(Optional) Displays the transceiver details.
Defaults None
Command Mode EXEC
Usage
Information
Starting from Release 10.5.2.1, the interface and transceiver parameters are optional. If you do
not specify these parameters, this command displays the optical information for all the interfaces.
Example
OS10# show interface phy-eth 1/1/14 transceiver | grep "Tunable
wavelength"
SFP1/1/14 Tunable wavelength= 1530.000nm
Supported
Releases
10.4.2E or later
show inventory media
Displays installed media in switch ports.
Syntax
show inventory media
Parameters None
Command Mode EXEC
Usage
Information
Use the show inventory media command to verify the media type inserted in a port.
Example
OS10# show inventory media
-------------------------------------------------------------------
System Inventory Media
-------------------------------------------------------------------
Node/Slot/Port Category Media Serial Dell EMC
Number Qualified
-------------------------------------------------------------------
1/1/1 Not Present
1/1/2 SFP+ SFP+ 10GBASE SR AM70843 true
1/1/3 Not Present
1/1/4 SFP+ SFP+ 10GBASE SR AKN0LC7 false
1/1/5 SFP+ SFP+ 10GBASE SR AM718GQ true
1/1/6 SFP+ SFP+ 10GBASE SR AM708XM true
1/1/7 SFP+ SFP+ 10GBASE SR AQ2237K true
1/1/8 SFP+ SFP+ 10GBASE SR AGT047N true
1/1/9 Not Present
1/1/10 Not Present
1/1/11 Not Present
1/1/12 Not Present
1/1/13 Not Present
1/1/14 Not Present
1/1/15 SFP+ SFP+ 10GBASE SR AK60QJN false
1/1/16 SFP+ SFP+ 10GBASE SR AL30KWM true
1/1/17 SFP+ SFP+ 10GBASE SR AQ22DMB true
1/1/18 SFP+ SFP+ 10GBASE SR AQM146U true
...
Supported
Releases
10.2.0E or later
410 Interfaces