Users Guide

SupportAssist commands
eula-consent
Accepts or rejects the SupportAssist end-user license agreement (EULA).
Syntax
eula—consent {support-assist} {accept | reject}
Parameters
● support-assist — Enter to accept or reject the EULA for the service.
● accept — Enter to accept the EULA-consent.
● reject — Enter to reject EULA-consent.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
If you reject the end-user license agreement, you cannot access the SupportAssist Configuration
submode. If there is an existing SupportAssist configuration, the configuration is removed and the feature
is disabled.
Example
(Accept)
OS10(config)# eula-consent support-assist accept
Example (Reject)
OS10(config)# eula-consent support-assist reject
This action will disable Support Assist and erase all configured data.Do
you want to proceed ? [Y/N]:Y
Supported
Releases
10.2.0E or later
show eula-consent support-assist
Displays the status of the SupportAssist End User License Agreement, whether it is accepted or rejected.
Syntax
show eula-consent support-assist
Parameters None
Default Rejected
Command Mode EXEC
Usage
Information
Use this command to view the status of the SupportAssist EULA.
Example
OS10# show eula-consent support-assist
EULA support-assist : Accepted
Supported
Releases
10.2.0E or later
show support-assist warranty
Displays warranty information for the OS10 switch and the relevant service contracts.
Syntax
show support-assist warranty
Parameters None
Default None
Command Mode EXEC
Troubleshoot Dell EMC SmartFabric OS10 1791