Users Guide

Name : subscription-2
Destination Groups(s) : dest2
Sensor-group Sample-interval
-----------------------------------
oc-bfd 15000
oc-bgp 15000
oc-buffer 15000
oc-device 15000
oc-environment 15000
oc-interface 15000
oc-lacp 15000
oc-lag 0
oc-lldp 15000
oc-stp 15000
oc-system 15000
oc-vendor-ufd 15000
oc-vendor-vxlan 15000
oc-vlan 15000
oc-vrrp 15000
Encoding : gpb
Transport : grpc TLS : disabled
Source Interface : ethernet1/1/1
Active : true
Reason : Connection summary: One or more active connections
The connection 10.11.56.204:40002 is in connected state
Supported
releases
10.4.3.0 or later
Example: Configure streaming telemetry
OS10(config)# telemetry
OS10(conf-telemetry)# enable
OS10(conf-telemetry)# destination-group dest1
OS10(conf-telemetry-dg-dest1)# destination 10.11.56.204 40001
OS10(conf-telemetry-dg-dest1)# exit
OS10(conf-telemetry)# subscription-profile subscription-1
OS10(conf-telemetry-sp-subscription-1)# sensor-group bgp 300000
OS10(conf-telemetry-sp-subscription-1)# sensor-group bgp-peer 0
OS10(conf-telemetry-sp-subscription-1)# sensor-group buffer 15000
OS10(conf-telemetry-sp-subscription-1)# sensor-group device 300000
OS10(conf-telemetry-sp-subscription-1)# sensor-group environment 300000
OS10(conf-telemetry-sp-subscription-1)# sensor-group interface 180000
OS10(conf-telemetry-sp-subscription-1)# sensor-group lag 0
OS10(conf-telemetry-sp-subscription-1)# sensor-group system 300000
OS10(conf-telemetry-sp-subscription-1)# destination-group dest1
OS10(conf-telemetry-sp-subscription-1)# encoding gpb
OS10(conf-telemetry-sp-subscription-1)# transport grpc no-tls
OS10(conf-telemetry-sp-subscription-1)# source-interface ethernet 1/1/1
OS10(conf-telemetry-sp-subscription-1)# end
OS10# show telemetry
Telemetry Status : enabled
-- Telemetry Destination Groups --
Group : dest1
Destination : 10.11.56.204 Port : 40001
-- Telemetry Sensor Groups --
Group : bgp
Sensor Path : bgp/bgp-oper/bgpPrfxCntrsEntry
Sensor Path : bgp/bgp-oper/bgpPeerCount
Group : bgp-peer
1742
Telemetry