Users Guide

Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command deletes the set clause from a route map.
Example
OS10(conf-route-map)# set tag 23
Supported
Releases
10.2.0E or later
set weight
Set the BGP weight for the routing table.
Syntax
set weight weight
Parameters weight — Enter a number as the weight the route uses to meet the route map specification, from 0 to
65535.
Default Default router-originated is 32768 — all other routes are 0.
Command Mode ROUTE-MAP
Usage
Information
The no version of the command deletes the set clause from the route map.
Example
OS10(conf-route-map)# set weight 200
Supported
Releases
10.2.0E or later
show route-map
Displays the current route map configurations.
Syntax
show route-map [map-name]
Parameters map-name — (Optional) Specify the name of a configured route map. A maximum of 140 characters.
Defaults None
Command Mode EXEC
Usage
Information
None
Example
OS10# show route-map
route-map abc, permit, sequence 10
Match clauses:
ip address (access-lists): hello
as-path abc
community hello
metric 2
origin egp
route-type external type-1
tag 10
Set clauses:
metric-type type-1
origin igp
tag 100
Supported
Releases
10.3.0E or later
1534 Access Control Lists