Users Guide
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-----END CERTIFICATE-----
2. Create a VXLAN gateway in VMware vCenter console.
This following steps configure the VXLAN gateway:
a. Open a browser window, enter the vCenter IP address, and log in to VMware vCenter.
b. Click Service Definitions from the left navigation pane.
c. Click the Hardware Devices tab.
d. Click the green + icon under Hardware Devices to add a device. The Add Hardware Device dialog window opens.
e. Enter a name for the device in the Name box and copy the certificate generated in the OS10 switch and paste it in the
Certificate box and click OK.
If successfully establishing connectivity between the VTEP and the NSX controller, the console displays the current
connection status between the controller and the management IP address of the VTEP.
VXLAN
1305