Users Guide

PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 225.1.0.0), uptime 01:40:17, expires 00:00:58, RP 10.1.100.6, flags: SCJ
Incoming interface: vlan1251, RPF neighbor 10.192.168.5
Outgoing interface list:
vlan2001 Forward/Sparse 01:40:17/Never
vlan2002 Forward/Sparse 01:40:09/Never
vlan2003 Forward/Sparse 01:40:04/Never
vlan2004 Forward/Sparse 01:40:04/Never
vlan2005 Forward/Sparse 01:40:04/Never
(192.168.1.201, 225.1.0.0), uptime 01:27:01, expires 00:00:30, flags: CTP
Incoming interface: vlan2001, RPF neighbor 0.0.0.0
Outgoing interface list:
(192.168.1.202, 225.1.0.0), uptime 01:27:01, expires 00:00:30, flags: CTP
Incoming interface: vlan2001, RPF neighbor 0.0.0.0
Outgoing interface list:
(172.16.1.201, 225.1.0.0), uptime 01:27:01, expires 00:00:31, flags: CT
Incoming interface: vlan1251, RPF neighbor 10.192.168.5
Outgoing interface list:
vlan2001 Forward/Sparse 01:27:01/Never
The show ip pim mcache command displays the multicast route entries.
AG4# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 225.1.0.0)
Incoming interface : vlan1251
Outgoing interface list :
vlan2001
(192.168.1.201, 225.1.0.0)
Incoming interface : vlan2001
Outgoing interface list :
(192.168.1.202, 225.1.0.0)
Incoming interface : vlan2001
Outgoing interface list :
(172.16.1.201, 225.1.0.0)
Incoming interface : vlan1251
Outgoing interface list :
vlan2001
The show ip pim bsr-router command displays information about the BSR.
AG4# show ip pim bsr-router
PIMv2 Bootstrap information
BSR address: 10.1.100.5
BSR Priority: 199, Hash mask length: 31
Expires: 00:00:20
The show ip pim rp mapping command displays information about all multicast group-to-RP mappings.
AG4# show ip pim rp
Group RP
Multicast
1131