Users Guide

ipv6 mld snooping querier
Enables MLD querier on the specified VLAN interface.
Syntax
ipv6 mld snooping querier
Parameters None
Default Not configured
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command disables the MLD querier on the VLAN interface.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld snooping querier
Supported
Releases
10.4.1.0 or later
ipv6 mld snooping query-interval
Configures the time interval for sending MLD general queries.
Syntax
ipv6 mld snooping query-interval query-interval-time
Parameters query-interval-time—Enter the interval time in seconds, ranging from 2 to 18000.
Default 60 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query interval to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld snooping query-interval 120
Supported
Releases
10.4.1.0 or later
ipv6 mld query-max-resp-time
Configures the maximum time for responding to a query advertised in MLD queries.
Syntax
ipv6 mld snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld snooping query-max-resp-time 15
Supported
Releases
10.4.1.0 or later
1044 Multicast