Connectivity Guide

Supported Releases 10.3.0E or later
route-map pbr-statistics
Enables counters for PBR statistics.
Syntax
route-map [map-name] pbr-statistics
Parameters map-name—Enter the name of a congured route-map. A maximum of 140 characters.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# route-map map1 pbr-statistics
Supported Releases 10.3.0E or later
set next-hop
Sets an IPv4 or IPv6 next-hop address for policy-based routing.
Syntax
set {ip | ipv6} next-hop address
Parameters address — Enter the next-hop IPv4 or IPv6 address.
Defaults Not congured
Command Mode ROUTE-MAP
Usage Information None
Example
OS10(conf-route-map)# set ip next-hop 10.10.10.10
Supported Releases 10.3.0E or later
set next-hop track
Sets the next-hop IPv4 or IPv6 address to track the PBR object.
Syntax
set {ip | ipv6} next-hop address track track-id
Parameters
• address—Enter an IPv4 or IPv6 address.
• track-id—(Optional) Enter the track ID of the PBR object.
Defaults Not congured
Command Mode ROUTE-MAP
Usage Information None
Example
OS10(conf-route-map)# set ip next-hop 10.10.10.10 track-id 12
Supported Releases 10.3.0E or later
498 Layer 3