Reference Guide

Supported Releases 10.2.0E or later
show ntp associations
Displays the NTP master and peers.
Syntax
show ntp associations
Parameters None
Default Not congured
Command Mode EXEC
Usage Information
• (none) — One or more of the following symbols displays:
• * — Synchronized to this peer.
• # — Almost synchronized to this peer.
• + — Peer was selected for possible synchronization.
• - — Peer is a candidate for selection.
• ~ — Peer is statically congured.
• remote — Remote IP address of the NTP peer.
• ref clock — IP address of the remote peer’s reference clock.
• st — Peer stratum (number of hops away from the external time source). 16 means that the NTP peer
cannot reach the time source.
• when — Last time the device received an NTP packet.
• poll — Polling interval (in seconds).
• reach — Reachability to the peer (in octal bitstream).
• delay — Time interval or delay for a packet to complete a round-trip to the NTP time source (in
milliseconds).
• offset — Relative time of the NTP peer’s clock to the network device clock (in milliseconds).
• disp — Dispersion.
Example
OS10# show ntp associations
remote ref clock st when poll reach delay offset disp
=============================================================
10.10.120.5 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
*172.16.1.33 127.127.1.0 11 6 16 377 -0.08 -1499.9 104.16
172.31.1.33 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
192.200.0.2 0.0.0.0 16 - 256 0 0.00 0.000 16000.0
OS10# show ntp associations vrf management
Supported Releases 10.2.0E or later
show ntp status
Displays NTP conguration information.
Syntax
show ntp status
Parameters status — (Optional) View the NTP status.
Default Not congured
System management 379