Reference Guide

Supported Releases 10.3.1E or later
fc zoneset
Creates an FC zoneset and adds the existing FC zones to the zoneset.
Syntax
fc zoneset zoneset-name
Parameters zoneset-name — Enter a name for the FC zoneset. The name must start with a letter and may contain
characters: A-Z, a-z, 0-9, $, _, -, ^
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command removes the FC zoneset.
Example
OS10(config)# fc zoneset set
OS10(conf-fc-zoneset-set)# member hba1
Supported Releases 10.3.1E or later
fcoe fcmap
Congures an FC map that identies the fabric.
Syntax
fcoe fcmap fc-map
Parameters fabric-map — Enter the FC map ID. The range is 0xefc00-0xefcff.
Defaults Not congured
Command Mode Vfabric CONFIGURATION
Usage Information
The no version of this command disables the FC map.
Example
OS10(config)# vfabric 100
OS10(conf-vfabric-100)# fcoe fcmap 0xEFC64
Supported Releases 10.3.1E or later
feature fc
Enables the F_Port globally.
Syntax
feature fc domain-id domain-id
Parameters domain-id — Enter the domain ID of the F_Port, from 1 to 239.
Defaults Disabled
Command Mode CONFIGURATION
Fibre channel 107