Users Guide

Parameters
● * — Enter to clear all BGP sessions.
● soft — (Optional) Enter to configure and activate policies without resetting the BGP TCP session
— BGP soft reconfiguration.
● in — (Optional) Enter to activate only ingress (inbound) policies.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear ip bgp *
Supported
Releases
10.3.0E or later
clear ip bgp dampening
Clears the path information of the dampened and undampened prefixes.
Syntax
clear ip bgp dampening [vrf vrf-name] [ipv4–prefix | ipv6–prefix]
Parameters
● vrf vrf-name — (OPTIONAL) Enter vrf then the name of the VRF to clear dampened paths
information.
● ipv4–prefix — (Optional) Enter an IPv4 prefix of the dampened path.
● ipv6–prefix — (Optional) Enter an IPv6 prefix of the dampened path.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# clear ip bgp dampening 1.1.15.5
Supported
Releases
10.3.0E or later
clear ip bgp flap-statistics
Clears all or specific IPv4 or IPv6 flap counts of prefixes.
Syntax
clear ip bgp [vrf vrf-name] [ipv4–address | ipv6–address] flap-statistics
[ipv4–prefix | ipv6–prefix]
Parameters
● vrf vrf-name — (OPTIONAL) Enter vrf then the name of the VRF to clear flap statistics
information.
● ipv4–address — (Optional) Enter an IPv4 address to clear the flap counts of the prefixes learned
from the given peer.
● ipv6–address — (Optional) Enter an IPv6 address to clear the flap counts.
● ipv4–prefix — (Optional) Enter an IPv4 prefix to clear the flap counts of the given prefix.
● ipv6–prefix — (Optional) Enter an IPv6 prefix to clear the flap counts of the given prefix.
Default Not configured
Command Mode EXEC
Usage
Information
None
666 Layer 3