Users Guide

show interface transceiver “Tunable wavelength”
Display the configured wavelength value of the optical interface.
Syntax
show interface phy-eth interface transceiver | grep “Tunable wavelength”
Parameters interface — Specify the interface corresponding to which you want to view the optical wavelength
details.
Defaults None.
Command Mode EXEC PRIVILEGE
Usage
Information
None.
Example
OS10# show interface phy-eth 1/1/14 transceiver | grep "Tunable
wavelength"
SFP1/1/14 Tunable wavelength= 1530.000nm
Supported
Releases
10.4.2E or later
show inventory media
Displays installed media in switch ports.
Syntax
show inventory media
Parameters None
Command Mode EXEC
Usage
Information
Use the show inventory media command to verify the media type inserted in a port.
On the MX9116n Fabric Switching Engine and MX5108n Ethernet Switch, server-facing interfaces are on
the backplane and are enabled by default. To view the backplane port connections to servers, use the
show inventory media command. In the output, a FIXED port does not use external transceivers
and always displays as Dell EMC Qualified.
Example
OS10# show inventory media
-------------------------------------------------------------------
System Inventory Media
-------------------------------------------------------------------
Node/Slot/Port Category Media Serial Dell EMC
Number Qualified
-------------------------------------------------------------------
1/1/1 Not Present
1/1/2 SFP+ SFP+ 10GBASE SR AM70843 true
1/1/3 Not Present
1/1/4 SFP+ SFP+ 10GBASE SR AKN0LC7 false
1/1/5 SFP+ SFP+ 10GBASE SR AM718GQ true
1/1/6 SFP+ SFP+ 10GBASE SR AM708XM true
1/1/7 SFP+ SFP+ 10GBASE SR AQ2237K true
1/1/8 SFP+ SFP+ 10GBASE SR AGT047N true
1/1/9 Not Present
1/1/10 Not Present
1/1/11 Not Present
1/1/12 Not Present
1/1/13 Not Present
1/1/14 Not Present
1/1/15 SFP+ SFP+ 10GBASE SR AK60QJN false
1/1/16 SFP+ SFP+ 10GBASE SR AL30KWM true
1/1/17 SFP+ SFP+ 10GBASE SR AQ22DMB true
1/1/18 SFP+ SFP+ 10GBASE SR AQM146U true
...
Interfaces 303