Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

661

662

663

664

665

666

667

668

669

670

enterprises.6027.3.10.1.2.10.1.4.1.2 = 1

enterprises.6027.3.10.1.2.10.1.4.1.3 = 1

enterprises.6027.3.10.1.2.10.1.4.2.1 = 0

enterprises.6027.3.10.1.2.10.1.5.1.1 = "flashmntr"

enterprises.6027.3.10.1.2.10.1.5.1.2 = "l2mgr"

enterprises.6027.3.10.1.2.10.1.5.1.3 = "vrrp" Hex: 76 72 72 70

enterprises.6027.3.10.1.2.10.1.5.2.1 = "sysd" Hex: 73 79 73 64

The output above displays that the software core files generated by the system.

Manage VLANs using SNMP

The qBridgeMIB managed objects in Q-BRIDGE-MIB, defined in RFC 2674, allows you to use SNMP to manage VLANs.

Creating a VLAN

To create a VLAN, use the dot1qVlanStaticRowStatus object.

The snmpset operation shown in the following example creates VLAN 10 by specifying a value of 4 for instance 10 of the

dot1qVlanStaticRowStatus object.

> snmpset -v2c -c mycommunity 123.45.6.78 .1.3.6.1.2.1.17.7.1.4.3.1.5.10 i 4

SNMPv2-SMI::mib-2.17.7.1.4.3.1.5.10 = INTEGER: 4

Assigning a VLAN Alias

Write a character string to the dot1qVlanStaticName object to assign a name to a VLAN.

[Unix system output]

> snmpset -v2c -c mycommunity 10.11.131.185 .1.3.6.1.2.1.17.7.1.4.3.1.1.1107787786 s "My

VLAN"

SNMPv2-SMI::mib-2.17.7.1.4.3.1.1.1107787786 = STRING: "My VLAN"

[Dell system output]

Dell#show int vlan 10

Vlan 10 is down, line protocol is down

Vlan alias name is: My VLAN

Address is 00:01:e8:cc:cc:ce, Current address is 00:01:e8:cc:cc:ce

Interface index is 1107787786

Internet address is not set

MTU 1554 bytes, IP MTU 1500 bytes

LineSpeed auto

Displaying the Ports in a VLAN

Dell Networking OS identifies VLAN interfaces using an interface index number that is displayed in the output of the show interface

vlan command.

The following example shows viewing the VLAN interface index number using SNMP.

Dell(conf)#do show interface vlan id 10

% Error: No such interface name.

R5(conf)#do show interface vlan 10