Administrator Guide

deny (OPTIONAL) Enter the keyword deny to set the route map default as deny.
sequence-number (OPTIONAL) Enter a number to identify the route map for editing and sequencing with
other route maps. You are prompted for a sequence number if there are multiple instances
of the route map. The range is from 1 to 65535.
Defaults Not congured.
If you do not dene a keyword (permit or deny) for the route map, the permit action is the default.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information Use caution when you delete route maps because if you do not specify a sequence number, all route maps with the
same map-name are deleted when you use the no route-map map-name command.
Example
Dell(conf)# route-map dempsey
Dell(config-route-map)#
Related Commands
• show cong — display the current conguration.
set as-path
To modify the AS path for border gateway protocol (BGP) routes, congure a lter.
Syntax
set as-path prepend as-number [... as-number]
254 Access Control Lists (ACL)