Administrator Guide
Defaults As above.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6.(0.0) Added aes 128 encryption algorithm parameter.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Usage Information
NOTE: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP. TCP and ICMP rules are not valid
for SNMP. In IPv6 ACLs port rules are not valid for SNMP.
No default values exist for authentication or privacy algorithms and no default password exists. If you forget a
password, you cannot recover it; the user must be recongured. You can specify either a plain-text password or an
encrypted cypher-text password. In either case, the password is stored in the conguration in an encrypted form
and displayed as encrypted in the show running-config command.
If you have an encrypted password, you can specify the encrypted string instead of the plain-text password. The
following command is an Example of how to specify the command with an encrypted string.
NOTE: The number of congurable users is limited to
16.
Example
Dell# snmp-server user privuser v3group v3 encrypted auth md5
9fc53d9d908118b2804fe80e3ba8763d priv des56 d0452401a8c3ce42804fe80e3ba8763d
Usage Information The following command is an example of how to enter a plain-text password as the string authpasswd for user
authuser of group v3group.
Example
Dell#conf
Dell(conf)# snmp-server user authuser v3group v3 auth md5 authpasswd
Usage Information The following command congures a remote user named n3user with a v3 security model and a security level of
authNOPriv.
Simple Network Management Protocol (SNMP) and Syslog 1503