Administrator Guide

Usage Information If the specied color-map does not exist, the Diserv Manager (DSM) creates a color map and sets all the DSCP
values to green (low drop precedence).
Example
The following example assigns the color map, bat-enclave-map, to interface gi 1/11.
Dell(conf)# int gi 1/11
Dell(conf-if-gi-1/11)# qos dscp-color-policy bat-enclave-map
Related Commands
• dscp— sets the number of specic DSCP values for color map prole to yellow or red.
• qos dscp-color-map— congures the DSCP color map.
show qos dscp-color-policy
Display DSCP color policy conguration for one or all interfaces.
Syntax show qos dscp-color-policy {summary [interface] | detail {interface}}
Parameters
summary Enter the summary keyword to display summary information about a color policy on one
or more interfaces.
Detail Enter the detail keyword to display detailed information about a color policy on one or
more interfaces.
interface Enter the name of the interface that has color policy congured.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5.0.0 Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Example
Display summary information about a color policy on one or more interfaces.
Dell# show qos dscp-color-policy summary
Interface dscp-color-map
GI 1/10 mapONE
GI 1/11 mapTWO
Display summary information about a color policy on a specific interface.
Dell# show qos dscp-color-policy summary te 1/10/1
Interface dscp-color-map
GI 1/10 mapONE
Displayed detailed color policy information on an interface.
1302 Quality of Service (QoS)