Administrator Guide

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information
Use this command to specify the name of the output QoS policy. Once output policy is specied, rate-shape,
scheduler strict, bandwidth-percentage, and WRED can be dened. This command enables the qos-policy-output
conguration mode—(conf-qos-policy-out).
Related Commands
• bandwidth-percentage — assigns percentage of bandwidth to the class/queue.
• wred — assigns yellow or green drop precedence.
queue egress
Assign a WRED Curve to all eight egress Multicast queues or designate the percentage for the Multicast bandwidth queue.
Syntax
queue egress multicast linecard {slot number port-set number | all} [wred-
profile name | multicast-bandwidth percentage]
To return to the default, use the no queue egress multicast linecard {slot number port-set
number | all} [wred-profile name | multicast-bandwidth percentage] command.
Parameters
linecard number Enter the keyword linecard then the line card slot number.
port-set number Enter the keywords port-set then the line card’s port pipe. The range is from 0 or 1.
all Enter the keyword all to apply to all line cards.
wred-prole name (OPTIONAL) Enter the keywords wred-profile then your WRED prole name in
character format (16 character maximum). Or use one of the pre-dened WRED prole
names.
Pre-dened Proles: wred_drop, wred-ge_y, wred_ge_g, wred_teng_y, wred_teng_g.
multicast-
bandwidth
percentage
(OPTIONAL) Enter the keywords multicast-bandwidth then the bandwidth
percentage. The range is from 0 to 100%.
Defaults none
Command Modes CONFIGURATION
Quality of Service (QoS) 1273