Reference Guide

show boot
Displays boot partition-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not configured
Command Mode EXEC
Usage
Information
Use the boot system command to set the boot partition for the next reboot.
Example
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
---------------------------------------------------------
Node-id 1 Flash Boot [B] 10.2.0E [A] 10.2.0E [B] active
Example (Detail)
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: B
Active SW Version: 10.2.0E
Active Kernel Version: Linux 3.16.7-ckt25
Active Build Date/Time: 2016-10-03T23:11:14Z
Standby Partition: A
Standby SW Version: 10.2.0E
Standby Build Date/Time: 2016-10-03T23:11:14Z
Next-Boot: active[B]
Supported
Releases
10.2.0E or later
show diag
Displays diagnostic information for port adapters and modules.
Syntax
show diag
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show diag
00:00.0 Host bridge: Intel Corporation Atom processor C2000 SoC
Transaction Router (rev 02)
00:01.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root
Port 1 (rev 02)
00:02.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root
Port 2 (rev 02)
00:03.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root
Port 3 (rev 02)
00:04.0 PCI bridge: Intel Corporation Atom processor C2000 PCIe Root
Port 4 (rev 02)
00:0e.0 Host bridge: Intel Corporation Atom processor C2000 RAS (rev 02)
00:0f.0 IOMMU: Intel Corporation Atom processor C2000 RCEC (rev 02)
Troubleshoot OS10 777