Reference Guide

7. Change the next boot partition to the standby partition in EXEC mode. Use the active parameter to set the next boot
partition from standby to active.
boot system standby
8. (Optional) Check whether the next boot partition has changed to standby in EXEC mode.
show boot detail
9. Reload the new software image in EXEC mode.
reload
Image download
OS10# image download ftp://userid:passwd@hostip:/filepath
Image install
OS10# image install image://filename.bin
Show version
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2018 by Dell Inc. All Rights Reserved.
OS Version: 10.4.1.0X
Build Version: 10.4.1.0.X.9
Build Time: 2018-06-12T22:18:40-0700
System Type: S4148F-ON
Architecture: x86_64
Up Time: 2 days 03:37:25
Boot system partition
Set the boot partition to active or standby for subsequent boot cycles. Boot OS10 from standby to load the image on the
standby partition, or boot from active to load the currently running image.
1. Display current boot information in EXEC mode.
show boot detail
2. Configure the boot system in EXEC mode.
boot system [active | standby]
● active — Resets the running partition as the subsequent boot partition.
● standby — Sets the standby partition as the subsequent boot partition.
View boot detail
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: A
Active SW Version: 10.4.1.0X
Active SW Build Version: 10.4.1.0.X.425
Active Kernel Version: Linux 4.9.82
Active Build Date/Time: 2018-07-20T19:07:39Z
Standby Partition: B
Standby SW Version: 10.4.1.0X
Standby SW Build Version: 10.4.1.0.X.404
Standby Build Date/Time: 2018-07-19T13:37:20Z
Next-Boot: active[A]
526
System management