Reference Guide

Usage
Information
The no version of this command removes the uplink-state group.
Example
OS10(config)# uplink-state-group 1
Supported
Releases
10.4.0E(R3) or later
upstream
Adds an interface or a range of interfaces as an upstream interface to the uplink-state group.
Syntax
upstream {interface-type | interface-range}
Parameters
● interface-type — Enter the interface type as Ethernet or port-channel.
● interface-range — Enter the range of interfaces.
Default None
Command Mode UPLINK-STATE-GROUP
Usage
Information
You cannot assign an interface that is already a member of an uplink-state group to another group. The
no version of this command removes the interface from the uplink-state group.
Example
OS10(config)# uplink-state-group 1
OS10(conf-uplink-state-group-1)# upstream ethernet 1/1/45-1/1/48
Supported
Releases
10.4.0E(R3) or later
OS10 image upgrade
The image download command simply downloads the software image — it does not install the software on your device. The
image install command installs the downloaded image to the standby partition.
NOTE:
If the active partition contains any modified text files or custom packages installed, they would not be available in
the standby partition. Backup the modified files and re-install the packages after downloading the image.
1. (Optional) Backup the current running configuration to the startup configuration in EXEC mode.
copy running-configuration startup-configuration
2. Backup the startup configuration in EXEC mode.
copy config://startup.xml config://<backup file name>
3. Download the new software image from dell.com/support, extract the bin files from the tar file, and save the file in EXEC
mode.
image download file-url
4. (Optional) View the current software download status in EXEC mode.
show image status
5. Install the software image in EXEC mode.
image install image-url
6. (Optional) View the status of the current software install in EXEC mode. In S5148F-ON, open a new SSH or Telnet session
to check the status of the current software.
show image status
System management
525