Reference Guide

redistribute
Redistributes information from another routing protocol or routing instance to the OSPFv3 process.
Syntax
redistribute {bgp as-number | connected | static} [route-map route-map
name]
Parameters
● as-number — Enter an autonomous number to redistribute BGP routing information throughout the
OSPFv3 instance (1 to 4294967295).
● route-map name — Enter the name of a configured route-map.
● connected — Enter the information from connected (active) routes on interfaces to redistribute.
● static — Enter the information from static routes on interfaces redistribute.
Defaults Not configured
Command Mode ROUTER-OSPFv3
Usage
Information
When an OSPFv3 redistributes, the process is not completely removed from the BGP configuration. The
no version of this command disables the redistribute configuration.
Example
OS10(config)# router ospfv3 100
OS10(config-router-ospfv3-100)# redistribute bgp 4 route-map dell1
Example
(Connected)
OS10((config-router-ospfv3-100)# redistribute connected route-map dell2
Supported
Releases
10.3.0E or later
router-id
Configures a fixed router ID for the OSPFv3 process.
Syntax
router-id ip-address
Parameters ip-address — Enter the IP address of the router as the router ID.
Default Not configured
Command Mode ROUTER-OSPFv3
Usage
Information
Configure an arbitrary value in the IP address format for each router. Each router ID must be unique. Use
the fixed router ID for the active OSPFv3 router process. Changing the router ID brings down the existing
OSPFv3 adjacency. The new router ID becomes effective immediatley. The no version of this command
disables the router ID configuration.
Example
OS10(config)# router ospfv3 10
OS10(config-router-ospfv3-100)# router-id 10.10.1.5
Supported
Releases
10.3.0E or later
router ospfv3
Enters Router OSPFv3 mode and configures an OSPFv3 instance.
Syntax
router ospfv3 instance-number
Parameters instance-number—Enter a router OSPFv3 instance number, from 1 to 65535.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command deletes an OSPFv3 instance.
430 Layer 3