Reference Guide

Supported
Releases
10.4.1.0 or later
ipv6 mld snooping query-interval
Configures the time interval for sending MLD general queries.
Syntax
ipv6 mld snooping query-interval query-interval-time
Parameters query-interval-time—Enter the interval time in seconds, ranging from 2 to 18000.
Default 60 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query interval to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld snooping query-interval 120
Supported
Releases
10.4.1.0 or later
ipv6 mld query-max-resp-time
Configures the maximum time for responding to a query advertised in MLD queries.
Syntax
ipv6 mld snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld snooping query-max-resp-time 15
Supported
Releases
10.4.1.0 or later
ipv6 mld version
Configures the MLD version.
Syntax
ipv6 mld version version-number
Parameters version-number—Enter the version number as 1 or 2.
Default 2
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the version number to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ipv6 mld version 1
376 Layer 3