Reference Guide

Default 60 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query interval to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-interval 120
Supported
Releases
10.4.1.0 or later
ip igmp query-max-resp-time
Configures the maximum time for responding to a query advertised in IGMP queries.
Syntax
ip igmp snooping query-max-resp-time query-response-time
Parameters query-response-time—Enter the query response time in seconds, ranging from 1 to 25.
Default 10 seconds
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the query response time to default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping query-max-resp-time 15
Supported
Releases
10.4.1.0 or later
ip igmp version
Configures IGMP version.
Syntax
ip igmp version version-number
Parameters version-number—Enter the version number as 2 or 3.
Default 3
Command Mode VLAN INTERFACE
Usage
Information
The no version of this command resets the version number to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp version 2
Supported
Releases
10.4.1.0 or later
show ip igmp snooping groups
Displays the details of IGMP snooping group membership.
Syntax
show ip igmp snooping groups [vlan vlan-id [ip-address]]
Parameters
● vlan-id—(Optional) Enter the VLAN ID, ranging from 1 to 4093.
● ip-address—(Optional) Enter the IP address of the multicast group.
Layer 3 367