Reference Guide

Supported
Releases
10.2.0E or later
ip
Configures the IP time to live (TTL) value and the differentiated services code point (DSCP) value for the ERPM traffic.
Syntax
ip {ttl ttl-number | dscp dscp-number}
Parameters
● ttl-number — Enter the TTL value (1 to 255)
● dscp-number — Enter the DSCP value (0 to 63).
Default
● TTL: 255
● DSCP: 0
Command Mode MONITOR-SESSION (ERPM)
Usage
Information
The no version of this command removes the TTL and the DSCP values configured.
Example
OS10(conf-mon-erpm-source-10)# ip ttl 16
OS10(conf-mon-erpm-source-10)# ip DSCP 63
Supported
Releases
10.4.0E(R1) or later
monitor session
Creates a session for monitoring traffic with port monitoring.
Syntax
monitor session session-id type [local | rpm-source | erpm-source]
Parameters
● session-id — Enter a monitor session ID (1 to 18).
● local — (Optional) Enter a local monitoring session.
● rpm-source — (Optional) Enter a remote monitoring session.
● erpm-source — (Optional) Enter an encapsulated remote monitoring session.
Default local
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the monitor session.
Example
OS10(config)# monitor session 1
OS10(conf-mon-local-1)#
Example (RPM)
OS10(config)# monitor session 5 type rpm-source
OS10(conf-mon-rpm-source-5)#
Example (ERPM)
OS10(config)# monitor session 10 type erpm-source
OS10(conf-mon-erpm-source-10)#
Supported
Releases
10.2.0E or later
Layer 2 251