Reference Guide

When an LLDP-MED endpoint is newly detected or connected to the network, the lldp-med fast-start-repeat-count
command enables the network to quickly detect the endpoint. The LLDP-MED fast start repeat count specifies the number of
LLDP packets that are sent during the LLDP-MED fast start period. By default, the device sends three packets per interval.
Change the number of packets a device sends per second — up to 10.
Rapid availability is crucial for applications such as emergency call service location (E911).
● Enable fast start repeat count which is the number of packets sent during activation in CONFIGURATION mode (1 to 10,
default 3).
lldp-med fast-start-repeat-count number
Configure fast start repeat count
OS10(config)# lldp med fast-start-repeat-count 5
View LLDP configuration
● View the LLDP configuration in EXEC mode.
show running-configuration
● View LLDP error messages in EXEC mode.
show lldp errors
● View LLDP timers in EXEC mode.
show lldp timers
● View the LLDP traffic in EXEC mode.
show lldp traffic
View running configuration
OS10# show running-configuration
View LLDP errors
OS10# show lldp errors
Total Memory Allocation Failures : 0
Total Input Queue Overflows : 0
Total Table Overflows : 0
View LLDP timers
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 2
Transmit interval in seconds: 30
View LLDP global traffic
OS10# show lldp traffic
LLDP traffic statistics:
Total Frames Out : 0
Total Entries Aged : 0
Total Frames In : 0
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
178
Layer 2